A remote workstation allows for the testing of parts at a remote line or cell. The workstation can be built as a single or dual station unit.  Remote workstations can be located up to 60 feet away from the tester.

The remote workstation includes a protective slide or flip cover, which initiates the test upon closure.  This protects the operator from the high voltages present during testing.

“Good” and “Reject” lights or a video monitor can be mounted to the workstation. This is especially useful if it is necessary for the operator to view the type of reject or the test results. A keyboard can also be located at the workstation, which gives the operator the ability to change over from one part number to another or to change limits/parameters.

The on-board/attached workstation allows testing of parts at the tester location. The workstation is permanently attached to the tester. It is available as either a single or dual station unit.  The “pass” or “fail” results are displayed on the tester's video monitor. The attached workstation includes a protective slide cover, which initiates the test upon closure.  It also protects the operator from the high voltages present during testing.